|
| |
|
|
Design of system model of L23 Blanik sailplane
Šenkýř, Miroslav ; Mališ, Michal (referee) ; Urík, Tomáš (advisor)
The aim of this diploma thesis is to create useful reference models of the glider L-23 Super Blaník and their use for framework proposal technology of production, which will improve accuracy and reduce labor intensity of production. The introduction of the thesis describes history of glider and historical overview of geometry transmission in terms of structure. The next chapter of the thesis deals with the description of reference models and rules of their creation. Section describing coordinate systems is closely linked with the previous chapter. Another section of thesis is dedicated to the importance of reference models in the product lifecycle. The creation and tuning of reference models of glider is described in the next chapter of thesis. The penultimate chapter deals with experiment, which allowed verification of reference model and product. The conclusion of the thesis describes proposed technology of production where used verified reference models and modern tools of CAD systems refine and facilitate production. The main objective in designing of reference models was the definition of high quality and usable surfaces. Also proposal technology of production was processed in order to ensure the improvement and simplification of manufacturing process.
|
|
|
Information System Design
Štancl, Marek ; Málek, Jakub (referee) ; Koch, Miloš (advisor)
The content of this thesis is analysis and design Planning software using agile software development methodology for small and middle size projects. I focused primary on specific work products of roles Analytic and Project manager laid down by selected methodology. Created solution can be used as project documentation for the subsequent development of application itself. The result of this thesis allow the reuse of this principles and practices to future projects of similar scope.
|
|
|
Project of production transfer
Polášek, Marek ; Prostredník, Daniel (referee) ; Fiala, Alois (advisor)
The present Master thesis deals with a transfer of the production process from Asia to Europe. The aim is to provide a life cycle of the project, its phases and the respective actions, an analysis of the risks associated with this transfer, a successful start-up of series production and the design of the internal audit as a standard of control for setting a stable and quality manufacture of the product in the Brno production plant.
|
|
|
Nanosafety and the Current Trends in the Risk Assessment of Nanoparticles
Valovič, Stela ; Poláčik, Ján (referee) ; Adamec, Vladimír (advisor)
This diploma thesis deals with the current state of nanosafety. The aim of this paper was to review and critically analyze approaches to facilitate the risk assassment of nanomaterials. In the first part it provides an overview of the most important methods and software tools that are used in this field. Methods were analyzed against a set of relevant criteria. Criteria include consideration of exposure, life cycle and physicochemical properties, transparency, applicability and the field of application. Different criteria were chosen for the software tools. Based on results, a new approach was suggested. The approach takes the form of a diagram based on questions. The purpose of the suggested approach is to recommend the most relevant method, tool or their combination to assess the safety of a nanomaterial depending on known characteristics. The approach was also implemented in a software tool.
|
|
|
Economic characteristics of the life cycle of building
Aigel, Petr ; Tichá, Alena (advisor)
Economic characteristics of building in the life cycle of the building work is a very broad topic. Captures economic part and associated technical part idem. Also, the life cycle of building work is very broad, a great many aspects and bearings enters into and influences the work. Excepting costs and prices of acquisition and maintenance of the works is necessary to observe quality of work performing. Both the materials used part and in terms of quality of each facture. This affects the amount of costs that may arise on the part of such unnecessary and degrading work as an entirety. This work attempts to describe all these aspects and influences, classify and appropriately use to monitoring of the works. All findings are tested on the building work - family house. The cornerstone is to find a suitable way of sorting accompanying work throughout its life cycle, allowing us to track costs and prices incurred on it. The conclusion consists answering questions and hypothesis exposed in the work.
|
|
| |
|
|
Financial and Economic Feasibility of Investment Carried out by Privat Investor
Nesvadba, Tomáš ; Vařbuchta, Petr (referee) ; Hromádka, Vít (advisor)
The subject of the thesis is a economic and financial feasibility of investment carried out by private investor. In the theoretical part, I deal with the private sector, investments, life cycle of a project, feasibility study and risks in pre-investment phase. Then I evaluate economic and financial aspects of project. In the practical section I evaluate the project in terms of economic and financial feasibility. I compare multiple project financing options. The result is finding out the best way to fund the project.
|
|
|
Economic and Financial Evaluation of Leisure Time Activities Project
Nesvadba, Tomáš ; Adlofová, Petra (referee) ; Hromádka, Vít (advisor)
The subject of the master’s thesis is a economic and financial evaluation of leisure time activities project. In the theoretical part, I deal with public sector, life cycle of a project, feasibilty study and cost methods. In the practical section I evaluate the project in therms of economic and financial feasibility. I compare multiple project options. I compare the results of my findings and I am trying to find out the best variant.
|
|
|
Development of masonry systeme for simple construction of internal masonry structures
Lidmilová, Klára ; Dobiáš,, Jiří (referee) ; Zach, Jiří (advisor)
The diploma thesis deals with the development of a new masonry system, for the production of which recycled brick could be used as a secondary raw material. In the field of literary research, the work deals with the methods of construction of vertical structures, the possibilities of lightening concrete, the life cycle of building materials and the use of secondary raw materials in construction. In the practical part, a masonry system was designed based on market research in the field of internal non-load-bearing masonry structures and requirements for these structures. In order to achieve these properties, concrete was chosen as the material for its production, where recycled brick was used as an alternative aggregate. As it is supposed to be a system for precise masonry, the material was compacted by vibrocompression. At the beginning, recipes were designed to verify the basic properties of concrete: density of hardened concrete, compressive strength and tensile bending strength, then other properties such as thermal conductivity and sound absorption coefficient were tested on improved recipes. Lightening and dimensional modules have been modified to achieve optimal properties. This was followed by a proposal for the method of masonry and surface treatment of a wall. Finally, the economic and environmental aspects of the masonry system were evaluated.
|
guest ::
